^^^ Cheap Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2" Long – 1/8" Width; 14 Raker Tooth

Lowes Circular Saw Blades – Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/8″ Width; 14 Raker Tooth

Thank you for checking out these pages. For any individual who is looking for the very best Circular Saw Blades items and trustworthy, we advise Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/8″ Width; 14 Raker Tooth as the best option for you to have a budget friendly cost and great quality. To guarantee you get the optimum gain from this item, following an evaluation of Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/8″ Width; 14 Raker Tooth.

Features and Specifications: Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/8″ Width; 14 Raker Tooth

  • For Wood or Metal Cutting; 1/8″ Width; 14 Raker Tooth; 0.025″ Thickness; 0.047″ Kerf

The picture depicted represents one blade; the pricing is for one blade/package. NOTE: The owner’s manual of some woodcutting bandsaw may stipulate that it can cut metal, but woodcutting bandsaws can only cut non-ferrous metals, such as aluminum, brass, copper, etc. Cutting steel could damage your saw, due to the fact that blade speed on most woodcutting bandsaws (average 800 to 3500 fpm) is not slow enough (40 to 200 fpm) for cutting ferrous metals (i.e. steel). Trying to cut steel at woodcutting speeds will ruin the blade due to extreme heat produced. Carbon tool steel bandsaw blades are made from high end carbon steel. It can cut all types of woods and is especially ideal for soft woods i.e. pine, polar, fir and spruce. It is also used for cutting plastics, aluminum, metals, and mild steel. Cutting mild steel at speeds under 200 fpm (feet per minute) with liquid coolant running along the back of the blade yields the best results. Following is a guideline for choosing an adequate tooth pattern to cut metal materials, Use 24 raker to cut 1/16″ to 1/4″ thick material, 18 raker to cut 1/8″ to 3/8″ thick material, 14 raker to cut 3/16″ to 7/16″ thick material, 10 raker to cut 1/4″ to 5/8″ thick material, 6 Hook to cut 3/8″ to 2″ thick material, 4 Hook to cut 3/4″ to 4-1/2″ thick material, 3 Hook to cut 1″ to 6″ thick material, 2 Hook to cut 2″ to 12″ thick material, There may be a number of other bandsaws or models that use the same blade lengths as the ones listed: 131-1/2 inch ( 10 ft. 11-1/2 inch, 10′ 11-1/2″ ) bandsaw blades suit the following models:Grizzly G0513; G0513X2; G0513B; G0640X 17″; General International 90-320 M1 (Metalcutting); If in doubt, to determine bandsaw blade length: 1 – Check the owner’s manual of your bandsaw machine for specifications – not only the length, but also the range of the width and thickness.2 – If the owner’s manual is not available, refer to previous invoices.3 – Cut your old bandsaw blade so t

One can find the data and therefore the details with regards to Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/8″ Width; 14 Raker Tooth to obtain increased proportionate, to view most recent rate, browse reviews coming from consumers who have paid for this product, and additionally you’ll be ready to choose diverse similar item prior to opt to pay.

Make sure you buy the best quality products at special rates if you are interested in purchasing this item. Before you purchase make sure you buy it at the shop that has a good track record and great service. Thank you for visiting this page, we hope it can assist you to obtain information of Magnate M131.5C18R14 Carbon Tool Steel Bandsaw Blade, 131-1/2″ Long – 1/8″ Width; 14 Raker Tooth.

Leave a Reply

Your email address will not be published. Required fields are marked *